Your cart is empty
Tools
-
8mm Stem Seal Install Tool OEM VW
8mm stem seal install tool. VW OEM part number 10-204 8mm stem seal install tool. VW OEM part number 10-204... -
Wiseco 84mm Piston Ring Compressor Sleeve
Hard anodized and Teflon coated for low friction and prolonged wear resistance. Tapers down to a smooth radius to the specific bore size to make installation breeze. Broken rings are a thing of the past! For all engines except VR6. Hard anodized and Teflon coated for low friction and prolonged wear resistance. ... -
12mm Triple Square Head Bolt Tool 1/2" Drive
For head bolt with 12mm triple square drive. Mk1 '78-up 8v Gas, 1.6L diesel (12mm) & 16v, Mk2 8v, diesel & 16v, Mk3 8v, diesel & VR6. Made By Gearwrench. For head bolt with 12mm triple square drive. Mk1 '78-up 8v Gas, 1.6L diesel (12m... -
VW 1.5L-2.0L Aluminum CNC Machined Torque Plate 10mm/11mm RENTAL
Rental of part number TQR 100 torque plate. $400 is the deposit and when returned within 1 month you will be credited $340($400 less $60 one month rental). You also may be charged if any damage is done to the torque plate or missing parts. When renting specify Engine Code, Head being used & Bore Size, 10mm or 11mm Head Bolt/Stud size. After 2 months torque plate can not be returned for credit. Rental of part number TQR 100 torque plate. $400 is the deposit and when returne... -
Clutch Alignment Tool (All 020 16V and Mk3 2.0L)
Clutch Alignment Tool (All 020 16V and Mk3 2.0L) For disc with 28 teeth splines. Clutch Alignment Tool (All 020 16V and Mk3 2.0L) For disc with 28 teeth splines.... -
5th Gear Adjusting Tool for "020" Transaxles '80-early'99
5th Gear Adjusting Tool for "020" Transaxles '80-'early'99. Mk1, Mk2 and Mk3 2.0L. 5th Gear Adjusting Tool for "020" Transaxles '80-'early'99. Mk1, Mk2 a... -
C.V. Bolt Removal Tool 8mm 12 point (triple square)
8mm 12 point hex (triple square). Used for removing the inner C.V. bolts that hold the drive-shaft to the transmission. 8mm 12 point hex (triple square). Used for removing the inner C.V. bolts that ho... -
Transaxle Oil Drain Tool (17mm)
17mm hex on 3/8" drive. Used for removing the 17mm oil drain plugs on manual transmissions. 17mm hex on 3/8" drive. Used for removing the 17mm oil drain plugs on manual tra... -
"020" Transaxle Drive Flange Compressor (VW tool # 201)
For removing and installing spring loaded drive flanges from "020" transaxles. Mk1 GTI, all Mk2 and Mk3. For removing and installing spring loaded drive flanges from "020" transaxles. M...