Your cart is empty
8v Solid Lifter Parts
-
10mm Oil Galley Plug w/sealing washer
10mm x 1mm 10mm x 1mm... -
22mm Plug for injector port '84-'93
22mm plug for injector port when converting to carburetors '84-'93 CIS and '87-'93 Digifant (set of 4). (note: '83 and older is 24mm) 22mm plug for injector port when converting to carburetors '84-'93 CIS and '87-'... -
24mm Soft Plug for 8V,16V Heads and G60, VR6 Blocks
24mm soft plug. Used on 8v,16v heads and G-60, VR6 blocks 24mm soft plug. Used on 8v,16v heads and G-60, VR6 blocks... -
8mm Stem Seal Install Tool OEM VW
8mm stem seal install tool. VW OEM part number 10-204 8mm stem seal install tool. VW OEM part number 10-204... -
8V Camshaft & Intermediate Shaft Bolt
'75-'06 8v Cam Bolt '11-'14 8v Jetta "CBPA" '75-'9/'98 Intermediate Shaft Bolt (Will not fit Mk4 California Jetta '03-'05 with 2.0L "BBW" engine) '75-'06 8v Cam Bolt '11-'14 8v Jetta "CBPA" '75-'9/'98 Intermediate Shaft Bolt (... -
Lower Spring Seats (set of 8) '75-'95
A set of 8 lower spring seats used in the '75-'95 VW 4 cylinder engines. 16V engines need 2 sets. A set of 8 lower spring seats used in the '75-'95 VW 4 cylinder engines. 16V eng... -
Heavy-Duty Valve Springs for 8V (set of 8) up to '95
For 8V cars up to '95. Recommended for high RPM use (over 7000 RPM). This springs fit '75-'87 8v Solid liter heads and '85-'95 1.8L Hyd and 2.0L crossflow heads to '95. 109081 (Outer installed height 1.250" (31.75mm (72 lb.(Inner installed height 1.100" (28mm) 36 lb.) For 8V cars up to '95. Recommended for high RPM use (over 7000 RPM). This spring... -
Valve Adjusting Shim, Sizes from 2.75mm-4.25mm
Priced each. Sizes from 2.75mm-4.25mm. 31mm O.D.for 35mm lifter. Put sizes needed in the comment box when checking out. (Please note 3.05mm & 3.75mm are No Longer Available) Priced each. Sizes from 2.75mm-4.25mm. 31mm O.D.for 35mm lifter. Put sizes neede...
