Clutch operating shaft lever for the "020" transmission. OEM VW. OEM Part # 02K 141 709A
$57.00
Add:
Clutch and Pad Brake Pedal Pad Manual Trans. Mk2 Golf & Jetta, Corrado, Mk3 Golf, Jetta & Cabrio, VW Fox, Quantum, Passat '90-'97, EuroVan Manual Trans, Audi 4000 '82-up, Audi Coupe '80-'87. OEM part Number 321 721 173
$5.00
Add:
Inner CV joint gasket set (100mm). Mk1 '85-up to Mk6. OEM Part Number 8D0 407 309. Set of 2.
$12.00
Add:
Clutch Alignment Tool (All Mk1 & Mk2 "020" 8V) For disc with 24 teeth splines.
$11.00
Add:
Clutch Alignment Tool (All 020 16V and Mk3 2.0L) For disc with 28 teeth splines.
$15.00
Add:
Set of 6 OEM Stretch type mounting bolts for preasure plate to crankshaft on 020 transmission Mk1,Mk2,Mk3 2.0L. Also for flywheel to crankshaft on 02A transmission Corrado G60, Passat 16V/TDI & Mk3 TDI. Vanagon Diesel as well (Torque 22lbs. and 1/4 turn) See tool #812.558 for locking "020" type flywheels and pressure plates. 10x1x19mm
$14.00
Add:
Set of 6 ARP HD mounting bolts for preasure plate to crankshaft on 020 transmission Mk1,Mk2,Mk3 2.0L. Also for flywheel to crankshaft on 02A transmission Corrado G60, Passat 16V/TDI & Mk3 TDI as well as Vanagon Diesel (Torque w/Thread Locker 54 ft lbs) See tool #812.558 for locking "020" type flywheels and pressure plates.10x1x19.5mm
$60.00
Add:
Bolts for Flywheel to pressure plate. Set of 9 bolts for the 210mm clutch. 4 cylinder. These bolts are small diameter and under high stress. It's a good idea to replace them when replacing the clutch. Fits 1983-early 1999 Mk1, Mk2 and Mk3 with 020 transmission. (NOT for G60/VR6 -See 141 106)
$22.50
Add:
8v 020 trans, Main Seal and Push rod seal. 1976-1992. Up-to 1993 for Cabriolet.
$12.00
Add:
