7mm stem seal install tool. VW OEM part number 3129
$30.00
... more info Sold Out
A set of 8 lower spring seats used in the '75-'95 VW 4 cylinder engines. 16V engines need 2 sets.
$48.00
Add:
Kit includes everything needed to convert your Mk1 '88-'93, 1985-1992 Hydraulic lifter 8V cylinder head ('85-'92 GTI, GLI & Digifant Heads w/40mm intake valves std.) to Our Hi Flow Valve 40-42mm X 33-35mm (stainless) valves with 7mm stems, This complete kit includes 40-42mm intake valves with 7mm stems, 33-35mm exhaust valves with 7mm stems, 7mm tapered intake guides, 7mm tapered exhaust guides,...
$448.00
... more info
Intake valve (40mm, 8mm stem). For the Mk1 '88-'93, Mk2 ’85 to '92 1.8 GTI & Jetta GLI with hydraulic lifters, Corrado, and Digifant cars. Valve length: 91mm. Factory quality,(for high performance use see 109 109S, and 109 113.) 109093 OEM Part # 035 109 601 F, 048 109 601 A
$20.00
Add:
Exhaust valve for Mk1 '88-'93, Mk2 '85-'92 1.8L Hydraulic Lifter Engines. Valve Head diameter: 33mm Valve length: 90.8mm Stem diameter: 8mm Triple Groove 109103 OEM Part # 053 109 611
$18.00
Add:
Highflow Stainless Steel EV8 (21-4N), Hardened Tip (52 HRC), 40mm intake valve with 7mm stem necked down to 6.5mm for hyd lifter, 91.60mm overall length, Mk1 '88-'93, Mk2 '85-'92 1.8L 40mm heads and '93-up 2.0L crossflow heads. 10 grams lighter than std 40mm 8mm stem valve. Higher flow than std. valve. Black nitride treatment reduces friction, improves heat dissipation and Valve guide wear. (To...
$25.00
Add:
Oversize Stainless Steel EV8 (21-4N), Hardened Tip (52 HRC) 41mm intake valve with 7mm stem necked down to 6.5mm (works with std. 40mm intake seat) for hyd lifter Mk1 '88-'93, '85-'92 1.8L 40mm heads and '93-up 2.0L crossflow heads. 10 grams lighter than std 40mm 8mm stem valve. Higher flow than std. valve. Black nitride treatment reduces friction, improves heat dissipation and Valve guide...
$25.00
Add:
Inconel 751, 33.5mm (+.5mm) Oversize Exhaust valve, A must for any tubro/supercharged engines also for high output unleaded street and race engines, A great replacement valve for G-60 and Audi turbo, Hardened Tip (52 HRC), 7mm stem necked down to 6.5mm for Hyd lifter (works with std. 33mm exhaust seat) 1.8L 8v head. Higher flow than std. valve.(To convert 8mm head ('85-'92) to 7mm. Parts needed...
$30.00
Add:
Highflow Stainless Steel EV16 (21-8N), Hardened Tip (52 HRC), 33mm exhaust valve, 7mm stem necked down to 6.5mm, 90.95mm overall length, For Hyd lifter 1.8L 8v, ABA, Audi 10v, V6 2.8L 12v heads. Higher flow than std. valve. Black nitride treatment reduces friction, improves heat dissipation and Valve guide wear. (To convert 8mm head to 7mm. Parts needed 109 222 exhaust valve guide, 109 290 7mm...
$25.00
Add: