Your cart is empty
Tools Corrado
-
13mm Catalytic Exhaust Wrench
Makes getting t0 the top cat bolt a little easier. 13mm Makes getting t0 the top cat bolt a little easier. 13mm... -
7mm Stem Seal Install Tool OEM VW
7mm stem seal install tool. VW OEM part number 3129 7mm stem seal install tool. VW OEM part number 3129... -
Flywheel Locking Tool (all VW/Audi with Crank Mounted Flywheels)
VW #3067 T30670 VW #3067 T30670... -
T1701 Universal Fuel Pump Nut Cap Spanner Wrench
Simplify the job involved with removing and installing the fuel pump retaining ring (nut) that holds the fuel pump module onto the gas tank. This tool has a sturdy three-leg design that can be firmly placed on the retainer. Driving the fastener from three points reduces the possibility of slipping or damaging the retainer. Fit: Mk2 Golf and Jetta EuroVan '92-'03 Mk3 Golf and Jetta Mk4 Golf, Jetta... Simplify the job involved with removing and installing the fuel pump retaining r... -
12mm Triple Square Head Bolt Tool 1/2" Drive
For head bolt with 12mm triple square drive. Mk1 '78-up 8v Gas, 1.6L diesel (12mm) & 16v, Mk2 8v, diesel & 16v, Mk3 8v, diesel & VR6. Made By Gearwrench. For head bolt with 12mm triple square drive. Mk1 '78-up 8v Gas, 1.6L diesel (12m... -
VW 1.5L-2.0L Aluminum CNC Machined Torque Plate 10mm/11mm RENTAL
Rental of part number TQR 100 torque plate. $400 is the deposit and when returned within 1 month you will be credited $340($400 less $60 one month rental). You also may be charged if any damage is done to the torque plate or missing parts. When renting specify Engine Code, Head being used & Bore Size, 10mm or 11mm Head Bolt/Stud size. After 2 months torque plate can not be returned for credit. Rental of part number TQR 100 torque plate. $400 is the deposit and when returne... -
C.V. Bolt Removal Tool 8mm 12 point (triple square)
8mm 12 point hex (triple square). Used for removing the inner C.V. bolts that hold the drive-shaft to the transmission. 8mm 12 point hex (triple square). Used for removing the inner C.V. bolts that ho... -
Transaxle Oil Drain Tool (17mm)
17mm hex on 3/8" drive. Used for removing the 17mm oil drain plugs on manual transmissions. 17mm hex on 3/8" drive. Used for removing the 17mm oil drain plugs on manual tra... -
12v VR6 Cam Alignment Plate
For 12v VR6 (VW# 3268) Used for holding the cams @ TDC. Not used for holding the cams while unbolting or torquing the cam bolt. For 12v VR6 (VW# 3268) Used for holding the cams @ TDC. Not used for holding the...