Your cart is empty
Pistons Rings
-
VR6 82.5mm Piston Ring Compressor Sleeve
The cure for VR6 Piston Installation! This Wiseco Ring Compressor Sleeve has been re machined by Techtonics with the correct 7.5 degrees angle for super easy piston installation into the VR6 engine. Broken rings are a thing of the past! Hard anodized and Teflon coated for low friction and prolonged wear resistance. Tapers down to a smooth radius to the specific bore size to make installation a... The cure for VR6 Piston Installation! This Wiseco Ring Compressor Sleeve has bee... -
Ring Set (82mm x 1.0 x 1.2 x 2.8)
Set of 4 Chrome Top Ring 1.0mm X 1.2mm X 2.8mm 82mm Bore Made in Japan For aftermarket forged pistons (not for OEM cast pistons) Set of 4 Chrome Top Ring 1.0mm X 1.2mm X 2.8mm 82mm Bore Made in Japan For after... -
Ring Set (82.5mm x 1.0 x 1.2 x 2.8)
Set of 4 Chrome Top Ring 1.0mm X 1.2mm X 2.8mm 82.5mm Bore Made in Japan For aftermarket forged pistons (not for OEM cast pistons) Set of 4 Chrome Top Ring 1.0mm X 1.2mm X 2.8mm 82.5mm Bore Made in Japan For aft... -
Ring Set (82.5mm 1.2 x 1.5 x 2.0) (Grant)
PISTON RING SET (82.5mm 2.0L). OEM quality (Grant). Bore size: 82.5mm. Chrome top ring. Ring widths: 1st-1.2mm, 2nd-1.5mm, oil-2.0mm. Std. bore size, 2.0 16v, Mk3 ABA '90-'91 Audi 80 3A & Mk4 2.0L 8v. Made in the USA PISTON RING SET (82.5mm 2.0L). OEM quality (Grant). Bore size: 82.5mm. Chrome to... -
Ring Set (82.5mm 1.2 x 1.5 x 2.0) (Goetze)
PISTON RING SET (82.5mm 2.0L). OEM quality (GOETZE). Bore size: 82.5mm. Chrome top ring. Ring widths: 1st-1.2mm, 2nd-1.5mm, oil-2.0mm. For std. bore 2.0 16v, ABA and '90-'91 Audi 80 3A engines. PISTON RING SET (82.5mm 2.0L). OEM quality (GOETZE). Bore size: 82.5mm. Chrome t... -
Turbo Ring Set (82.5mm 1.2 x 1.5 x 2.0) (Mahle)
TURBO PISTON RING SET 2.0T (82.5mm). OEM quality (Mahle). Bore size: 82.5mm. Moly Top Ring, Ring widths: 1st-1.2mm, 2nd-1.5mm, oil-2.0mm. For std. bore. VW 2.0T Mk5-Mk6, EOS & Tiguan, Audi A3, A4 & TT. Also can be used in these engines '90-'93 2.0 16v, ABA and '90-'91 Audi 80 3A engines. TURBO PISTON RING SET 2.0T (82.5mm). OEM quality (Mahle). Bore size: 82.5mm. Mol... -
Ring Set (83mm x 1.0 x 1.2 x 2.8)
This ring set is used for some of our 83mm forged piston sets. (#107 828 and 107 830 piston set) Set of 4. This ring set is used for some of our 83mm forged piston sets. (#107 828 and 107... -
Ring Set 83mm (1.2mm x 1.5mm x 2.0mm) (Hastings)
Piston Ring Set (83mm x 1.2 x 1.5 x 2.0mm widths) Late Audi 3A, 9A, ABA & ABF engines with 83mm bore. Made in the USA Piston Ring Set (83mm x 1.2 x 1.5 x 2.0mm widths) Late Audi 3A, 9A, ABA & ABF en... -
Ring Set 83.5mm (1.0mm x 1.2mm x 2.8mm)
This ring set is for our 83.5mm forged piston sets. set of 4. Gas Nitride Chrome Top Rings. Rings gaps must be check. Made by NPR Japan This ring set is for our 83.5mm forged piston sets. set of 4. Gas Nitride Chrome...