Your cart is empty
VR6 Head Parts
-
Techtonics Chromoly Valve Spring Retainers for 12v VR6
A set of Techtonics Tuning chromoly valve spring retainers for the 12v VR6. A set of Techtonics Tuning chromoly valve spring retainers for the 12v VR6.... -
High-Lift Valve Springs for 12v VR6 (set of 12)
H.D. Valve Spring Set for 12v VR6 engines. (Used for our 264/260, 268 & 276 cam sets) 109082 H.D. Valve Spring Set for 12v VR6 engines. (Used for our 264/260, 268 & 276 cam ... -
7mm Lash Cap 3.50mm-4.00mm (.1mm increments)
To be used on 7mm valve stem or pinned lifter. Sold each, Specify size needed when ordering. To be used on 7mm valve stem or pinned lifter. Sold each, Specify size needed wh... -
Titanium Valve Spring Retainer 7mm Triple Groove VR6 12v
Only 10.5 grams. (std are 19 grams ea.) Works with std valves and will work with our 39mm-42mm and 34mm-36mm 7mm stem valves. Set of 12. . Only 10.5 grams. (std are 19 grams ea.) Works with std valves and will work with... -
24v VR6 2.8L-3.6L Valve Spring kit w/Titanium Retainers
For the 24v 2.8L,3.2L & 3.6L engines. H.D. Springs, Titanium retainers and lower spring seats. 109086 For the 24v 2.8L,3.2L & 3.6L engines. H.D. Springs, Titanium retainers and lower... -
Valve Guide-silicone bronze 12v VR6 7mm
7mm Silicone bronze valve guides for VR6 engines.These have the correct 1mm step so the retainer will not hit the stem seal. 7mm Silicone bronze valve guides for VR6 engines.These have the correct 1mm step... -
Valve Guide-silicone bronze 12v VR6 7mm (No Step)
7mm Silicone bronze valve guides for race VR6 engines. These have no step so they installed .055" (1.40mm) deeper then our 109 230 guide. This gives more valve stem to retainer clearance for .455" higher lift camshafts (288 and 300 camshafts) 7mm Silicone bronze valve guides for race VR6 engines. These have no step so the... -
Valve Guide 2.8L 24V VR6 (65mm Long)
Valve Guide "long" (65mm) for the 2.8L 24v VR6. Made from Manganese-Silicon-Aluminum. Each 24v head uses 12 "short" (44mm) (109.223) and 12 long guides Valve Guide "long" (65mm) for the 2.8L 24v VR6. Made from Manganese-Silicon-Alum... -
Valve Guide 2.8L/3.2L 24V VR6 (44mm Short)
Valve Guide "short" (44mm) for the 24v VR6. Made from Manganese-Silicon-Aluminum. Each 24v head uses 12 short and 12 long guides (109 224 or 109 224L) Valve Guide "short" (44mm) for the 24v VR6. Made from Manganese-Silicon-Aluminum...