Clutch operating shaft lever for the "020" transmission. OEM VW. OEM Part # 02K 141 709A
$57.00
Add:
Clutch and Pad Brake Pedal Pad Manual Trans. Mk2 Golf & Jetta, Corrado, Mk3 Golf, Jetta & Cabrio, VW Fox, Quantum, Passat '90-'97, EuroVan Manual Trans, Audi 4000 '82-up, Audi Coupe '80-'87. OEM part Number 321 721 173
$5.00
Add:
Inner CV joint gasket set (100mm). Mk1 '85-up to Mk6. OEM Part Number 8D0 407 309. Set of 2.
$12.00
Add:
Mk3 Clutch Cable Self Adjusting. '93-'early'99 1H1 721 335 A 1H1721335A Gemo - Made in Germany
$45.00
Add:
This Clutch Cable is a manually adjusted version that will replace the self adjusting style. We pref the manual adjust over version the self adjust style simply because you can see and feel that you have proper end play. We have seen crankshaft thrust failures due to bad self adjust cables. Fits: 1993-early 1999 Mk3 Golf & Jetta 2.0L ABA 1995-2002 Cabrio 2.0L ABA
$45.00
Add:
Clutch Alignment Tool (All 020 16V and Mk3 2.0L) For disc with 28 teeth splines.
$15.00
Add:
Set of 6 OEM Stretch type mounting bolts for preasure plate to crankshaft on 020 transmission Mk1,Mk2,Mk3 2.0L. Also for flywheel to crankshaft on 02A transmission Corrado G60, Passat 16V/TDI & Mk3 TDI. Vanagon Diesel as well (Torque 22lbs. and 1/4 turn) See tool #812.558 for locking "020" type flywheels and pressure plates. 10x1x19mm
$14.00
Add:
Set of 6 ARP HD mounting bolts for preasure plate to crankshaft on 020 transmission Mk1,Mk2,Mk3 2.0L. Also for flywheel to crankshaft on 02A transmission Corrado G60, Passat 16V/TDI & Mk3 TDI as well as Vanagon Diesel (Torque w/Thread Locker 54 ft lbs) See tool #812.558 for locking "020" type flywheels and pressure plates.10x1x19.5mm
$60.00
Add:
Bolts for Flywheel to pressure plate. Set of 9 bolts for the 210mm clutch. 4 cylinder. These bolts are small diameter and under high stress. It's a good idea to replace them when replacing the clutch. Fits 1983-early 1999 Mk1, Mk2 and Mk3 with 020 transmission. (NOT for G60/VR6 -See 141 106)
$22.50
Add:
