Tools
-
7mm Stem Seal Install Tool OEM VW
7mm stem seal install tool. VW OEM part number 3129 7mm stem seal install tool. VW OEM part number 3129... -
T1701 Universal Fuel Pump Nut Cap Spanner Wrench
Simplify the job involved with removing and installing the fuel pump retaining ring (nut) that holds the fuel pump module onto the gas tank. This tool has a sturdy three-leg design that can be firmly placed on the retainer. Driving the fastener from three points reduces the possibility of slipping or damaging the retainer. Fit: Mk2 Golf and Jetta EuroVan '92-'03 Mk3 Golf and Jetta Mk4 Golf, Jetta... Simplify the job involved with removing and installing the fuel pump retaining r... -
12mm Triple Square Head Bolt Tool 1/2" Drive
For head bolt with 12mm triple square drive. Mk1 '78-up 8v Gas, 1.6L diesel (12mm) & 16v, Mk2 8v, diesel & 16v, Mk3 8v, diesel & VR6. Made By Gearwrench. For head bolt with 12mm triple square drive. Mk1 '78-up 8v Gas, 1.6L diesel (12m... -
Clutch Alignment Tool (All 020 16V and Mk3 2.0L)
Clutch Alignment Tool (All 020 16V and Mk3 2.0L) For disc with 28 teeth splines. Clutch Alignment Tool (All 020 16V and Mk3 2.0L) For disc with 28 teeth splines.... -
5th Gear Adjusting Tool for "020" Transaxles '80-early'99
5th Gear Adjusting Tool for "020" Transaxles '80-'early'99. Mk1, Mk2 and Mk3 2.0L. 5th Gear Adjusting Tool for "020" Transaxles '80-'early'99. Mk1, Mk2 a... -
C.V. Bolt Removal Tool 8mm 12 point (triple square)
8mm 12 point hex (triple square). Used for removing the inner C.V. bolts that hold the drive-shaft to the transmission. 8mm 12 point hex (triple square). Used for removing the inner C.V. bolts that ho... -
Transaxle Oil Drain Tool (17mm)
17mm hex on 3/8" drive. Used for removing the 17mm oil drain plugs on manual transmissions. 17mm hex on 3/8" drive. Used for removing the 17mm oil drain plugs on manual tra... -
"020" Transaxle Drive Flange Compressor (VW tool # 201)
For removing and installing spring loaded drive flanges from "020" transaxles. Mk1 GTI, all Mk2 and Mk3. For removing and installing spring loaded drive flanges from "020" transaxles. M... -
27mm Hex Socket for Timing Plug and Selector Shaft plug
27mm Hex Socket for Timing Plug and Trans ("020") Selector Shaft 27mm Hex Socket for Timing Plug and Trans ("020") Selector Shaft...