Bonneville New Record Holder 3

Piston Sets 1.8t

VW 1.5L-2.0L Aluminum CNC Machined Torque Plate 10mm/11mm RENTAL

VW 1.5L-2.0L Aluminum CNC Machined Torque Plate 10mm/11mm RENTAL

Rental of part number TQR 100 torque plate. $400 is the deposit and when returned within 1 month you will be credited $340($400 less $60 one month rental). You also may be charged if any damage is done to the torque plate or missing parts. When renting specify Engine Code, Head being used & Bore Size, 10mm or 11mm Head Bolt/Stud size. After 2 months torque plate can not be returned for credit.
$400.00
Add:
CNC Machined Aluminum Transmission Simulator Plate

CNC Machined Aluminum Transmission Simulator Plate

CNC Machined Aluminum Transmission Simulator Plate with Hardened Steel Inserts and mounting bolts. This is a MUST for boring and honing blocks. This part is as important or more than the torque plate.
$60.00
... more info
 Sold Out 
Ring Set (1.0 x 1.2 x 2.8) (set of 4) 81mm-83.5mm

Ring Set (1.0 x 1.2 x 2.8) (set of 4) 81mm-83.5mm

Set of 4 Gas Nitride Top Ring 1.0mm X 1.2mm X 2.8mm 81mm-83.5mm Bore Made in Japan For aftermarket forged pistons (not for OEM cast pistons)
$100.00
... more info
Ring Set (82mm x 1.0 x 1.2 x 2.8) (set of4)

Ring Set (82mm x 1.0 x 1.2 x 2.8) (set of4)

Set of 4 Gas Nitride Top Ring 1.0mm X 1.2mm X 2.8mm 82mm Bore Made in Japan For aftermarket forged pistons (not for OEM cast pistons)
$100.00
Add:
1.8t Piston Set 20mm Pin 81.5mm (.5mm over bore)

1.8t Piston Set 20mm Pin 81.5mm (.5mm over bore)

Stock replacement piston for AEB, ATW 1.8t engines w/20mm pins. Will fit the later 1.8t engines ('00-'05) w/19mm pin if early 20mm rods are used. Comes with 4ea Piston, Rings, Pins and Clips
$185.00
Add:
Supertech Forged Piston Set 1.8T 9.3-1 20mm Pin

Supertech Forged Piston Set 1.8T 9.3-1 20mm Pin

Supertech FORGED std bore 81mm-83mm piston set made for the Audi and VW 1.8T engine. 9.3-1 cr. Set of 4 pistons with rings, wrist pins and circlips. Uses Tool Steel 20mm HD wrist pins for a perfect match to Our #105.100 H Beam Forged Connecting Rods. Made from high silicon enhanced 4032 alloy that has lower thermal expansion. Offset wrist pins for quieter operation. HD Tool steel wrist pins....
$630.00
... more info
Wossner Forged Piston Set 1.8T 8.5-1 20mm Pin

Wossner Forged Piston Set 1.8T 8.5-1 20mm Pin

Wossner German Made Forged Piston Set (pistons, rings & pins) 1.8t ('96-'05) 81mm-82.5mm 13cc dish 8.5-1 Compression Ratio 32.7mm Compression Height 20mm pin 9075 107850
$615.00
... more info
Wossner Forged Piston Set 82.5mm 1.8T w/92.8mm Crank 9.2-1

Wossner Forged Piston Set 82.5mm 1.8T w/92.8mm Crank 9.2-1

FORGED 82.5mm or 82.7mm piston set made for the Audi and VW 1.8T engine using 92.8mm Crankshaft from a Mk4 2.0L or Mk5 2.0t.(Mk4 2.0 block can also be used) 9.2-1 compression ratio. Set of 4 pistons with rings, wrist pins and circlips. Uses 20mm wrist pins for a perfect match to Our #105.100ST H Beam Forged Connecting Rods. Made from high silicon alloy that has lower thermal expansion. Offset...
$615.00
... more info
Wiseco 81mm-95.5mm Piston Ring Compressor Sleeve

Wiseco 81mm-95.5mm Piston Ring Compressor Sleeve

Hard anodized and Teflon coated for low friction and prolonged wear resistance. Tapers down to a smooth radius to the specific bore size to make installation breeze. Broken rings are a thing of the past! For all engines except VR6.
$55.00
... more info

** FOR INTERNATIONAL CUSTOMERS **
The websites default shipping calculator for international orders can be rather high, to get the best quote for international shipping it will be best to email us a list of parts and where you want them shipped.

Copyright © 2023 Techtonics Tuning. Powered by Zen Cart