Bonneville New Record Holder

Tools

Special tools for the Audi and watercooled Volkswagen.



12V VR6 EuroVan Vibration Damper Locking Tool

12V VR6 EuroVan Vibration Damper Locking Tool

EuroVan 12V VR6 Vibration Damper Locking Tool. VW #3406. T34060. This tool is also used when doing timing chain service, by locking the crankshaft to remove the drive plate (flex plate) bolts. Special Order may take up to two weeks.
$230.00
Add:
13mm Catalytic Exhaust Wrench

13mm Catalytic Exhaust Wrench

Helps getting to the top cat bolt a little easier. 13mm
$10.00
Add:
ARP 83mm Tapered Ring Compressor

ARP 83mm Tapered Ring Compressor

These tapered ring compressors from ARP are CNC-machined from 6061-T6 billet tube material and feature a true radius for each different bore diameter. They are also relieved for wire O-rings on the bottom. Type 3 anodizing is used for long life, and the bore size is prominently engraved in 3/4 in. high numbers for easy identification. Their true-radius design is far superior to conventional...
$80.00
Add:
M16 Triple Square w/Tamper Resistant insert

M16 Triple Square w/Tamper Resistant insert

For Removing Tamper Resistant Trans Drain Plugs. Will also remove non tamper M16 Triple plugs. T33570
$38.00
Add:
12mm Triple Square Head Bolt Tool 1/2" Drive

12mm Triple Square Head Bolt Tool 1/2" Drive

For head bolt with 12mm triple square drive. Mk1 '78-up 8v Gas, 1.6L diesel (12mm) & 16v, Mk2 8v, diesel & 16v, Mk3 8v, diesel & VR6. Made By Gearwrench.
$21.00
Add:
VW 1.5L-2.0L Aluminum CNC Machined Torque Plate 10mm/11mm RENTAL

VW 1.5L-2.0L Aluminum CNC Machined Torque Plate 10mm/11mm RENTAL

Rental of part number TQR 100 torque plate. $400 is the deposit and when returned within 1 month you will be credited $340($400 less $60 one month rental). You also may be charged if any damage is done to the torque plate or missing parts. When renting specify Engine Code, Head being used & Bore Size, 10mm or 11mm Head Bolt/Stud size. After 2 months torque plate can not be returned for credit.
$400.00
Add:
CNC Machined Aluminum Transmission Simulator Plate

CNC Machined Aluminum Transmission Simulator Plate

CNC Machined Aluminum Transmission Simulator Plate with Hardened Steel Inserts and mounting bolts. This is a MUST for boring and honing blocks. This part is as important or more than the torque plate.
$60.00
... more info
 Sold Out 
Clutch Alignment Tool (All 020 16V and Mk3 2.0L)

Clutch Alignment Tool (All 020 16V and Mk3 2.0L)

Clutch Alignment Tool (All 020 16V and Mk3 2.0L) For disc with 28 teeth splines.
$15.00
Add:

** FOR INTERNATIONAL CUSTOMERS (EXCLUDING CANADA)**
The websites default shipping calculator for international orders can be rather high, to get the best quote for international shipping it will be best to email us a list of parts and where you want them shipped.

Copyright © 2023 Techtonics Tuning. Powered by Zen Cart