Cart 0 items
Your cart is empty
MENU

Supertech

  • Forged FSI 2.0T Piston Set Std Bore 82.5mm 9-1 CR
    Forged FSI 2.0T Piston Set Std Bore 82.5mm 9-1 CR
    82.5mm Bore, 20mm Pin, Made from high silicon enhanced 4032 alloy that has lower thermal expansion. Offset wrist pins for quieter operation. Cold extruded chrome moly steel wrist pins. This set includes 4 pistons, rings, pins and clips. Specs 82.5mm Bore 20mm Piston Pin 9-1 Compression Ratio 12.5 cc Dish Piston Weight 302 grams Compression Height 29.6mmm 82.5mm Bore, 20mm Pin, Made from high silicon enhanced 4032 alloy that has lower...
  • Forged 2.0T FSI Piston Set 83mm 9-1 CR (+.5mm over bore)
    Forged 2.0T FSI Piston Set 83mm 9-1 CR (+.5mm over bore)
    83mm Bore, 20mm Pin, Made from high silicon enhanced 4032 alloy that has lower thermal expansion. Offset wrist pins for quieter operation. Cold extruded chrome moly steel wrist pins. This set includes 4 pistons, rings, pins and clips. Specs 83mm Bore 20mm Piston Pin 9-1 Compression Ratio 13 cc Dish Piston Weight 308 grams Compression Height 29.6mmm 83mm Bore, 20mm Pin, Made from high silicon enhanced 4032 alloy that has lower t...
  • Forged Pistons 16v "ABF" 82.5mm (STD bore) (Tall block) 11.8-1
    Forged Pistons 16v "ABF" 82.5mm (STD bore) (Tall block) 11.8-1
    Made from high silicon enhanced 4032 alloy that has lower thermal expansion. Offset wrist pins for quieter operation. Cold extruded chrome moly steel wrist pins. This set includes 4 pistons, rings, pins and clips. Forged Piston Set 16v "ABF" 82.5mm (STD bore) (tall block) 11.8-1 CR. (Small end of rod needs to less than 23mm wide) see Rod part number 105 102M 107839 Made from high silicon enhanced 4032 alloy that has lower thermal expansion. Off...
  • Solid Cam follower-Intake (1.8t, 2.7t, 30v V6) Race "Pinned" WPC
    Solid Cam follower-Intake (1.8t, 2.7t, 30v V6) Race "Pinned" WPC
    WPC Treated Solid Cam follower-Intake 24mm O.D. (1.8t, 2.7t and 30v V6) Race "Pinned" (15.5mm) Uses 6mm lash cap. 27.5 grams. Priced each WPC Low Friction Treatment is a micro shot peening process that that enhances the surface to reduce friction and strengthen parts. This process is achieved by firing ultra fine particles towards the surface of the product at very high speeds. The resulting... WPC Treated Solid Cam follower-Intake 24mm O.D. (1.8t, 2.7t and 30v V6) Race "Pi...
  • Solid Cam follower - Ex. (1.8t, 2.7t, 30V V6) Race "Pinned" WPC
    Solid Cam follower - Ex. (1.8t, 2.7t, 30V V6) Race "Pinned" WPC
    Solid Cam follower-Exhaust 33.5mm O.D. (1.8t, 2.7t and 30v V6) Race "Pinned" (15.5mm) Uses 6mm Lash cap. 45.9 grams. Priced each WPC Low Friction Treatment is a micro shot peening process that that enhances the surface to reduce friction and strengthen parts. This process is achieved by firing ultra fine particles towards the surface of the product at very high speeds. The resulting thermal... Solid Cam follower-Exhaust 33.5mm O.D. (1.8t, 2.7t and 30v V6) Race "Pinned" (15...
  • Head Gasket 1.8t for 81mm-83mm bores (1.4mm Thick)
    Head Gasket 1.8t for 81mm-83mm bores (1.4mm Thick)
    High Performance Head gasket for Std bore up to 83mm 1.8t 5v engines. 1.4mm Thick. '96-'05 High Performance Head gasket for Std bore up to 83mm 1.8t 5v engines. 1.4mm Thic...
  • Metal (MLS) Head Gasket '83-'98 1.8L/2.0L 8V/16v 1.4mm Thick
    Metal (MLS) Head Gasket '83-'98 1.8L/2.0L 8V/16v 1.4mm Thick
    Multi Layer Metal (MLS Multi Layer Steel) Head Gasket for 1.8L 8V and 16V. Up to 83.5mm bore. Fits 1.8L and 2.0L 220mm (3A/9A blocks). (1.4mm thick) Multi Layer Metal (MLS Multi Layer Steel) Head Gasket for 1.8L 8V and 16V. Up to...
  • Head Gasket 12v VR6 (Metal) Mk3/Mk4 .65mm Thick 82.5mm Bore
    Head Gasket 12v VR6 (Metal) Mk3/Mk4 .65mm Thick 82.5mm Bore
    12v VR6 Special MLS head gasket for high compression Thickness: .65mm Raises compression ratio 1 point for Mk3 and .5 point for Mk4 Up to 82.5mm Bore Manufacturer: Supertech 12v VR6 Special MLS head gasket for high compression Thickness: .65mm Raises com...
  • Head Gasket 12v VR6 (Metal) Mk3/Mk4 .65mm Thick 84mm Bore
    Head Gasket 12v VR6 (Metal) Mk3/Mk4 .65mm Thick 84mm Bore
    12v VR6 Special MLS head gasket for high compression Thickness: .65mm Raises compression ratio 1 point for Mk3 and .5 point for Mk4 Up to 84mm Bore Manufacturer: Supertech 12v VR6 Special MLS head gasket for high compression Thickness: .65mm Raises com...